随着建筑市场的不断发展，传统的建筑现场浇砌模式资源利用率低、人力成本过高、安全系数较低和对环境的负面影响大等此类弊端与越来越严格的施工要求、能耗控制、安全保障、环境保护的矛盾日益凸显。

预制是一种资源高效的建筑方式。与现场浇筑相比，工厂预制构件可提高施工速度，减少所需人员。施工中采用的预制构件可提供更加安全和健康的工作环境，物料搬运更加快捷，同时产生更少的废料。此外，由于采用了高精度预制混凝土模具，降低了对水泥和钢材的使用量，预制释放的二氧化碳较现场浇筑施工相比大幅减少。

    我公司与Elematic合作开发出具有业内先进水平的预制混凝土模具。

主要技术指标Main performance

1）产品外形尺寸（长×宽）：10600mm×3500mm  

2）模具表面平面度公差值≤4mm。

3）模具对角线尺寸误差不超过±1mm。

4）模具边缘直线度公差≤2mm。

    With the development of the construction market.The traditional ways of casting on site is low utilization rate of resources,high human cost,bad for the environment around and unsafe. All of these above formed a serious contradiction with the requirement of construction which is more and more strict,the environment protection,the safety factors,and the resource control.

    Precast concrete is a efficient construction method.Comparing with the old ways,it can improve the construction speed, reduces the need for Construction personnel, provide more safe and healthy working environment , make the material delivery more efficient and produce less waste. In addition, due to the high accuracy of precast concrete mold, it also reduces the use amount of cement and steel and carbon dioxide released by precast is much more less than casting on site.

    Our company and Elematic cooperation to develop a precast concrete mould is the advanced level in this area in China .

    The precast concrete mould developed by CTIEC and Elecmatic have reached to domestic advanced level.

The main technical parameters

1)Product size(Length x Width)：10600mm×3500mm

2)The surface flatness tolerance of the mould≤4mm

3)The max diagonal difference of the mould±1mm